================================================================
License Agreement for Setup Utility Tools
================================================================

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and
   its third party suppliers.  You have no rights in the SOFTWARE
   except as expressly granted in accordance with this agreement.

2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products.  You are not permitted
   to (1) assign, sublicense, sell, rent, lease, convey, or transfer
   the SOFTWARE to any third party by any tangible media such as 
   floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE
   on a network or by a telephone line available to the public or (3) 
   alter, modify, decompile, disassemble, reverse engineer, or create
   derivative works based on the whole or any part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is 
   expressly specified, you are required to follow
   such direction.
   
3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE. 
   This agreement will also terminate if you fail to abide by any 
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.
   
4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN
   'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT
   TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND
   MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF
   THE SOFTWARE.  IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL
   PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE
   LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR
   CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO
   USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE.
   
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any 
   restrictions, laws or regulations imposed by the government of
   respective countries, and are required to obtain
   necessary approval prior to exporting the SOFTWARE.

=====================================================================
Additional Information:Setup Utility Tools Ver. 1.17.50
=====================================================================

This document provides information about the tools on the following 
items:
1. Tools Configuration
2. Prerequisites
3. File Configuration
4. Version Improvements
5. Cautions/Limitations
6. Inquiries

----------------------
1. Tools Configuration
----------------------
The Setup Utility Tools consist of the following 5 different tools:

* Upgrade Tool (VerUp.exe)
  Upgrades the driver from an old version to a newer version. 

* Uninstallation Tool (UnInst.exe)
  Deletes the selected print driver from the system.

* Icon Deletion Tool (DelPrn.exe)
  Deletes the printer icon from the printer folder.

* Setup Disk Creation Tool (MakeDisk.exe)
  Creates a setup disk for copying the driver installation 
  configuration in one computer, and installing the same 
  configuration into other computers.

* Setup Tool (UserSetup.exe / Setup.exe)
  Installs the driver with the same configuration stored in the setup
  disk.

----------------
2. Prerequisites
----------------
The tools operate on computers running with the following OS:

	Microsoft(R) Windows(R) 98
	Microsoft(R) Windows(R) Me
	Microsoft(R) WindowsNT(R) 4.0 (ServicePack6a or later is recommended)
	Microsoft(R) Windows(R) 2000
	Microsoft(R) Windows(R) XP
	Microsoft(R) Windows(R) XP x64 Edition
	Microsoft(R) Windows Server(R) 2003
	Microsoft(R) Windows Server(R) 2003 x64 Edition
	Microsoft(R) Windows Server(R) 2008
	Microsoft(R) Windows Server(R) 2008 x64 Edition
	Microsoft(R) Windows Server(R) 2012
	Microsoft(R) Windows Server(R) 2012 R2
	Microsoft(R) Windows Vista(R)
	Microsoft(R) Windows Vista(R) x64 Edition
	Microsoft(R) Windows(R) 7
	Microsoft(R) Windows(R) 7 x64 Edition
	Microsoft(R) Windows(R) 8
	Microsoft(R) Windows(R) 8 x64 Edition
	Microsoft(R) Windows(R) 8.1
	Microsoft(R) Windows(R) 8.1 x64 Edition

The driver and readme.txt are stored under the folder of each OS 
given below.
The Cautions/Limitations on the driver are described in readme.txt.
See the readme file before installing the driver.

        \Printer\HSTDRV\Win2000_XP
        \Printer\HSTDRV\x64

        \Printer\PCL\Win2000_XP
        \Printer\PCL\x64

---------------------
3. File Configuration
---------------------
DATAACCESS.DLL
DELPRN.EXE
DOASADMIN.EX_
FXDPUMON.DL_
FXDPUMON.HL_
FXEZDLL.DLL
FXEZHELP.CHM
FXEZUI.DLL
MAKEDISK.EXE
PATH.INI
SETUP.EX_
UNINST.EXE
VERUP.EXE
README.TXT

------------------------------------------------
4. Version Improvements
------------------------------------------------
[New creation]
Ver. 1.15.0

----------------------------
5. Cautions/Limitations
----------------------------

** Cautions when running the tools other than from the CD-ROM (such 
   as using the tools from the HDD)

When copying the tools to other mediums such as HDD, copy the folder 
"EzInst" and each driver folder in the CD-ROM in the
directories given below.

Note that the tools only operate in the following directories:

|-- HSTDRV                Stores the drivers for each OS
|      |------Win2000_XP
|      |------x64     
|
|-- PCL                   Stores the drivers for each OS
|      |------Win2000_XP
|      |------x64     
|
|--- EzInst            Stores the complete set of Setup Utility Tools


** Cautions/Limitations

* Selecting NDS Queue
  (When using WindowsNT(R) 4.0, Windows(R) 2000, Windows(R) XP, 
  Windows Server(R) 2003, Windows Vista(R), Windows Server(R) 2008, 
  Windows Server(R) 2008 R2, Windows Server(R) 2012, Windows Server(R) 2012 R2, Windows(R) 7, Windows(R) 8 or Windows(R) 8.1)

  Printing cannot be performed if a port/queue on the NDS tree that 
  does not exist in the destination port is selected in the Setup Disk 
  Creation Tool.


* Adding Multiple TCP/IP Direct Print Utility Ports (When using 
  Windows(R) 98 or Windows(R) Me)

  When adding multiple Fuji Xerox TCP/IP Direct Print Utility ports, 
  do not use the following port names for the subsequent added ports.

  * Port names with characters added to the end of an existing port 
    name such as "printer1" or "printer-01", if the existing port 
    name is "printer".

  * Port names with one or more characters taken away from an 
    existing port name, such as "prin" or "print", if the existing 
    port name is "printer".

    * The name is not case sensitive in either case above.

* When "An error has occurred during version upgrade" is displayed 
  during version upgrade

  Delete the print driver with the Uninstallation Tool.  Restart the 
  computer and create a new printer with the driver installation 
  tool.


* Restarting the system during installation/version upgrading (When 
  using WindowsNT(R) 4.0, Windows(R) 2000, Windows(R) XP, 
  Windows Server(R) 2003, Windows Vista(R), Windows Server(R) 2008, 
  Windows Server(R) 2008 R2, Windows Server(R) 2012, Windows Server(R) 2012 R2, Windows(R) 7, Windows(R) 8 or Windows(R) 8.1)

  When installing the print driver or upgrading the driver version 
  using the Setup Tool or Upgrade Tool, always restart 
  the computer following the instructions given in the message 
  displayed, before using the print driver.
  Unexpected errors may occur if the computer is not restarted.

* Reflecting the document size using the Setup Tool (When using 
  WindowsNT(R) 4.0)

  When a paper unique to the driver is selected, the document size 
  will not be reflected correctly.


* Reflecting the document size using the Setup Tool (When using 
  Windows(R) 2000, Windows(R) XP, Windows Server(R) 2003, Windows Vista(R),
  Windows Server(R) 2008, Windows Server(R) 2008 R2, Windows Server(R) 2012, 
  Windows Server(R) 2012 R2, Windows(R) 7, Windows(R) 8 or Windows(R) 8.1)

  When a paper unique to the driver is selected, the document size 
  may not be reflected correctly.


* If "Current printer settings may be changed if you install the new 
  driver.  Do you want to continue?" appears when installing 
  driver with the Setup Tool

  Select the check box "Upgrade driver using setup disk" in the 
  Setup Disk Creation Tool, and create a setup disk.

* If Setup Tool is created from a floppy disk using Setup Disk Creation 
  Tool with "Upgrade driver using setup disk" selected

  The verup.exe in the floppy disk cannot be activated. Please activate 
  setup.exe. By activating setup.exe, the print driver will also be 
  upgraded.

* Loading printing settings for Setup Tool

  When the Setup Tool is executed with [Allow general users to run setup] 
  specified, the printing settings saved in the setup disk will be loaded 
  to the printing settings of the administrator account.

  Even when the Setup Tool is executed without [Allow general users to 
  run setup] specified but with the administrators account specified at 
  the [User Account Control] screen, the printing settings saved in the 
  setup disk will be loaded to the printing settings of the administrator 
  account.

  To load settings to the printing settings of all users including users 
  who executed the Setup Tool, configure [Printing Defaults] of the 
  printer when creating the setup disk. You can set [Printing Defaults] 
  from the [Advanced] tab of the printer properties dialog.

* About restarting the system after executing the Setup Tool when [Run setup
  without displaying its screen] is specified

  Even when the screen is not displayed after executing the Setup Tool to carry out
  installation or version up of the print driver, always restart the system before
  using the print driver. Otherwise, unforeseen error may occur.

* About whether the execution of the Setup Tool is successful when [Run setup
  without displaying its screen] is specified

  If the Setup Tool is executed when [Run setup without displaying its screen] is
  specified, you can determine whether or not the execution is successful by the
  completion code returned: 0 when successful and a non-0 when not.

  Also, please check the reason for the failure by the message displayed when the
  Setup Tool is executed without specifying [Run setup without displaying its screen].

* Using the User Setup Tool when "Allow General User to Execute"is specified

  If a general user places the User Tool in his own desktop to execute it when the user 
  account control is enabled for his OS (Windows Vista  and above), an error may occur.

  When this happens, execute the tool again after allowing "Read & Execute" for the Users 
  group by the security settings of the folder where the User Setup Tool is placed. 


* Notes When Creating Setup Disk Using Setup Disk Creation Tool
  Run the Setup Disk Creation Tool in the same OS as the OS where you run the setup disk.
  Example:
  When running setup disk in Windows 7, run the Setup Disk Creation Tool in another PC with Windows 7.


-------------------
6. Inquiries
-------------------

Please call the number provided in the readme.txt for the relevant 
driver.


"Microsoft", "Windows", "Windows NT", "Windows Server", "Windows Vista" are 
registered trademarks of Microsoft Corporation, U.S.A. in the 
United States and other countries.

